| CPU | - Supports Intel® Core™2 Extreme Quad-Core / Core™2 Duo / Intel® Pentium® Extreme/ Intel® Pentium® D processors
- Supports1333/1066/800 MHz FSB
|
| Chipset | - Northbridge: Intel® P35 Express Chipset
- Southbridge: Intel® ICH9
- Gigabit Lan Controller
- 8 Channels ALC889A Audio controller
|
| Memory | - Supports DDR2 1066*/800/667/533 memory
- Dual Channel architecture supports up to 8GB by 4 DIMM slots
* Please refer "Memory Support List" for memory support information. |
| Expansion Slots | - 1 PCI Express X16 slot
- 3 PCI Express X1 slots
- 3 PCI slots
|
| Form Factor | - ATX form factor, 305 x 210mm
|
| Internal I/O Connectors | - 1 x 24-pin ATX main power connector
- 1 x 4-pin ATX 12V power connector
- 1 x floppy disk drive connector
- 1 x IDE connector
- 6 x SATA 3Gb/s connectors
- 1 x CPU fan header
- 2 x system fan headers
- 1 x power fan header
- 1 x front panel header
- 1 x front panel audio header
- 1 x CD In connector
- 1 x S/PDIF In header
- 4 x USB 2.0/1.1 headers
- 1 x chassis intrusion header
- 1 x power LED header
|
| Back Panel Connectors | - 1 x PS/2 keyboard port
- 1 x PS/2 mouse port
- 1 x parallel port
- 1 x coaxial S/PDIF Out connector
- 1 x optical S/PDIF Out connector
- 1 x serial port
- 4 x USB 2.0/1.1 ports
- 1 x RJ-45 port
- 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
|
| BIOS | - Supports Virtual DualBIOS
- 1 x 8 Mbit flash
- Use of licensed AWARD BIOS
- PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b
|
| Other Features | - Ultra Durable 2 Motherboard
- All Japanese manufactured solid
- Over-clocking Enhanced
|
| Remark | - Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
- Due to most hardware/software vendors no longer offer support for Win9X/ME. If some vendors still has Win9X/ME drivers available, we will publish on website.
- To enable hot plug capability for the SATA connectors controlled by the ICH9 South Bridge, you must install Windows Vista (on ICH9, hot plug is supported in Windows Vista only) and configure the SATA connectors for AHCI mode. (Refer to manual Chapter 2, "BIOS Setup," "Integrated Peripherals," for details on enabling AHCI.)
|
